Mapview In Staking Out Survey Mode - Leica GPS1200 Series Technical Reference Manual

32.7.2
Description
Data displayed
MapView Interactive Display Feature

MapView in Staking Out Survey Mode

When staking out a point in the Stakeout or Reference Line application programs, the Map
page is available. The MapView survey mode is provided for this operation, with some differ-
ences.
• In the Stakeout application program, active points can be selected using the touch
screen, as points to be staked.
• An arrow indicating the direction from the current position to the point to be staked is
provided.
• A box provides information such as the distance to the stakeout point and the CUT/FILL
value so the point to be staked can be found.
For Stakeout application program.
• From <Job:>, all points and displayable lines and areas are shown in grey.
• From <Stakeout Job:>, all points, according to filter settings, are displayed in black; lines
and areas are not displayed.
For Reference Line application program.
• From <Control Job:>, all points and displayable lines and areas are shown in grey.
• The point to be staked is displayed in black.
• The reference line/arc is displayed in black.
The STAKEOUT XX Stakeout, Map page is used as the example below. The functions
described are the same for all Map pages available when staking out.
GPS1200 737