Point Symbols - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

MapView Interactive Display Feature

Point Symbols

When <Show Points: Yes> in XX MapView Configuration, points are displayed, in all

modes, according to their class.

3D control point is a point of class CTRL with full coordinate triplet.

2D control point is a position only point of class CTRL.

Adjusted point is a point of class ADJ.

Reference point is a point of class REF.

Average point is a point of class AVGE.

Measured point is a point of class MEAS.

Single Point Position uploaded from LGO.

Navigated point is a point of class NAV.

Estimated point is a point of class EST.

Calculated COGO point is a point of class MEAS or CTRL depending on the

COGO calculation method.

Points of class NONE or points of class CTRL/MEAS with a height only component cannot

be displayed in MapView.

A list of the point types available, and their description, is available by pressing SYMBL (F3)

in XX MapView Configuration, Points page. Refer to "32.3 Configuring MapView".

Show Quick Links

Table of Contents