Leica GPS1200 Series Technical Reference Manual page 1204

Survey - Auto Points
Field Option
<Code Desc:> Output
<Moving Ant User input
Ht:>
<Msd Auto Output
Pts:>
<3D CQ:> Output
Next step
IF THEN
auto points are to be START (F1). Then, for <Log By: User Decides>, OCUPY (F3)
logged whenever an auto point is to be logged.
offset points are to be OFST1 (F4) or OFST2 (F5). Refer to "45.4 Offset Points of Auto
configured Points".
GPS1200
Description
The description of the code.
The default antenna height for auto points as defined in
the active configuration set is suggested. Refer to "2
Antenna Heights".
Available after pressing START (F1). The number of auto
points logged since START (F1) has been pressed.
The current 3D coordinate quality of the computed posi-
tion.
1204