Leica GPS1200 Series Technical Reference Manual page 1014

Reference Line
Description of fields
Field Option
<Control Job:> Choicelist
<Job:> Choicelist
<Coord Output
System:>
<Codelist:> Choicelist
Output
<DTM Job:> Choicelist
GPS1200
Description
The original points to be staked and the reference
lines/arcs are stored in this job. All jobs from Main
Menu: Manage...\Jobs can be selected.
The active job. All jobs from Main Menu:
Manage...\Jobs can be selected. Points which are
occupied after staking out are stored in this job. The
original points to be staked are not copied to this job.
The coordinate system currently attached to the
selected <Job:>.
No codes are stored in the selected <Job:>. All
codelists from Main Menu: Manage...\Codelists can
be selected.
Codes have already been stored in the selected
<Job:>. If codes had been copied from a System
RAM codelist, then the name of the codelist is
displayed. If codes have not been copied from a
System RAM codelist but typed in manually, then the
name of the active job is displayed.
Available for <Heights: Use DTM Model> in
REFLINE Configuration, Heights page. To select a
DTM to be staked. Heights are then staked out rela-
tive to the selected DTM.
1014