Leica GPS1200 Series Technical Reference Manual page 782

COGO
COGO menu options
Shift, Rotate & Scale
(Match Pts)
Area Division
End COGO
Next step
IF
a COGO calculation
method is to be started
COGO is to be configured SHIFT CONF (F2). Refer to "37.3 Configuring COGO".
COGO is to be ended
GPS1200
Description
To calculate the coordinates of new points using the
shifts, rotation and scale computed from selected
points.
Points with full coordinate triplets, position only
points and height only points can be used.
To divide an area by a
• defined line
• percentage
• size of a sub area.
To end COGO and return to the screen from where
COGO was accessed.
THEN
highlight the relevant option and press CONT (F1). Refer to the
chapters stated above.
highlight End COGO and CONT (F1).
782
Refer to
chapter
37.10
37.11