Reference Line
Field
Option
<Pos Limit:>
User input
<Height
Yes or No
Check:>
<Height
User input
Limit:>
<Beep near
Yes or No
Pt:>
<Dist from Pt:> User input
Next step
PAGE (F6) changes to the Heights page. Refer to paragraph "REFLINE Configuration,
Heights page".
GPS1200
Description
Available for <Pos Check: Yes>. Sets the maximum
horizontal coordinate difference which is accepted in
the position check.
Allows a check to be made on the vertical difference
between the manually occupied staked point and the
point to be staked. If the defined <Height Limit:> is
exceeded, the stakeout can be repeated, skipped or
stored.
Available for <Height Check: Yes>. Sets the
maximum vertical difference accepted in the height
check.
The receiver beeps when the horizontal radial
distance from the current position to the point to be
staked is equal to or less than defined in <Dist from
Pt:>.
Available for <Beep near Pt: Yes>. The horizontal
radial distance from the current position to the point to
be staked when a beep should be heard.
1020