Leica GPS1200 Series Technical Reference Manual page 421

Config...\Instrument Settings...
Field Option
Automatic
User Defined
<Suppress Automatic or
MPath:> Always On
Next step
IF satellites used in
the survey
are not to be config-
ured
are to be configured
Description
Incoming satellite signals are monitored by the
receiver. Data from signals which are flagged as
unhealthy are neither recorded nor used for real-time
computations.
Satellites must manually be included/excluded from
data recording and real-time computations with
HELTH (F4).
Available for GX1230 GG/ATX1230 GG.
Defines if phase multipath mitigation techniques will
be used. The recommended setting is Automatic.
THEN
CONT (F1) closes the screen and returns to the screen from where
CONFIGURE Satellite Settings was accessed.
HELTH (F4). Refer to paragraph "CONFIGURE Satellite Tracking".
GPS1200 421