Leica GPS1200 Series Technical Reference Manual page 1203

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - Auto Points

The thematical code for the auto point.

If a point code is selected then any open line/area is

closed. The occupied point is stored with the selected

code idependently of any line/area.

If a line code is selected then any open line is closed

and a new line with the selected code is created. The

line ID is defined by the configured line ID template.

The occupied point is assigned to that line. The line

stays open until it is closed manually or another line

code is selected.

If an area code is selected then the behaviour is as for

Available for <Thematc Codes: With Codelist>. The

setting for <Show Codes:> in CONFIGURE Coding &

Linework determines if either all codes or only point

codes are available. The attributes are shown as output,

input or choicelist fields depending on their definition.

Available for <Thematc Codes: Without Codelist>.

Codes can be typed in but not selected from a codelist. A

check is performed to see if a code of this name already

exists in the job. If so, the according attributes are shown.

Configure a display mask with a choicelist for code types

to define if a point, line or area code is typed in.

Show Quick Links

Table of Contents