Defining Reference Line/Arc Slopes - Leica GPS1200 Series Technical Reference Manual

Reference Line
41.4.5
Description
Access step-by-step
REFLINE
Define Slope

Defining Reference Line/Arc Slopes

It is possible to measure points and stake points on slopes related to a reference line/arc. A
slope can be defined and cut/fill values can then be displayed to the slope when measuring
along the reference line/arc. The slope is a plane from the reference line/arc and extends
along the length of the reference line/arc.
Slopes can be used when measuring to a reference line/arc, staking a point relative to a
reference line/arc or performing a grid stakeout relative to a reference line/arc.
Step Description
1. Refer to "41.2 Accessing Reference Line" to access REFLINE Reference
Line/Arc Begin.
2. CONT (F1) to access REFLINE Choose Task & Reference Line.
3. SLOPE (F3) to access REFLINE Define Slope.
This screen contains different fields depending on the options chosen for <Heights:> in
REFLINE Configuration, Heights page, and <Task:> in REFLINE Choose Task & Refer-
ence Line, Reference page.
GPS1200 1042