REFLINE
Stake +yyy.yy +xxx.xx,
Map page
Reference Line
Field
Option
<D Ht:>
User input
Next step
PAGE (F6) changes to the Map page. Refer to paragraph "REFLINE Stake +yyy.yy +xxx.xx,
Map page".
The Map page provides an interactive display of the data. Displayed is also
•
the horizontal distance from the current position to the point to be staked.
•
the height difference from the height of the current position to the height of the point to be
staked.
Description
The orthometric height of the current position is
displayed. If the orthometric height cannot be
displayed, the local ellipsoidal height is displayed. If it
is not possible to display the local ellipsoidal height,
the WGS 1984 height is displayed.
Available for <Edit Height: Yes> in REFLINE
Configuration, Heights page.
The design height, which is the orthometric height of
the target point to be staked, is displayed. If the ortho-
metric height cannot be displayed, the local ellip-
soidal height is displayed. If it is not possible to
display the local ellipsoidal height, the WGS 1984
height is displayed.
If a design height has been entered and SKIP (F4) or
LINE (F5) is used the true grid height for the next
point is shown as the suggested height.
GPS1200
1081