Leica GPS1200 Series Technical Reference Manual page 1199

Survey - Auto Points
Field Option
Msd Auto Points
PDOP
Quality 1D
Quality 2D
Quality 3D
VDOP
Next steps
Step Description
1. CONT (F1) closes the screen and returns to SURVEY Configuration, Auto
Points page.
2. CONT (F1) returns to the screen from where SURVEY Configuration, Auto
Points page was accessed.
Description
Output field for the number of auto points logged after
pressing START (F1) in SURVEY Survey: Job
Name, Auto page. Counting starts again from 0 when
START (F1) is pressed again.
Output field for the current PDOP of the computed
position.
Output field for the current height quality of computed
position.
Output field for the current 2D quality of computed
position.
Output field for the current 3D quality of computed
position.
Output field for the current VDOP of the computed
position.
GPS1200 1199