Tilt - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - General
22.8
Description
Access

Tilt

Tilt devices are used for measuring inclinations. The data from the tilt device is logged
together with the GPS raw observations. PC based software can convert the tilt data to a
readable ASCII format, e.g. RINEX.
In addition, a binary notification message can be output through ports P1, P2, P3, RX or NET
to controlling application software. A port configured as a remote port can be used to output
the notification message. The message contains the tilt measurements obtained by the
receiver from the tilt device.
The settings on this screen define the input port and parameters for incoming tilt measure-
ments.
Select Main Menu: Config...\Interfaces.... Highlight Tilt. EDIT (F3).
This option is not available for RX1250 with SmartAntenna.
GPS1200 532