Leica GPS1200 Series Technical Reference Manual page 1196

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - Auto Points

<Monitor CQ:> Yes or No

<3D CQ Limit:> User input

<Beep When:> Logging

Activates monitoring of the coordinate quality. Auto

points are stored when the coordinate quality is within

the defined limit. For example, only phase fixed solu-

tions can be logged by defining a CQ limit.

Available for <Monitor CQ: Yes>.

Limit for the coordinate quality above which an auto

point is no longer automatically stored. When the CQ

of the auto point falls again below the defined value

then the storing of auto points begins again.

Instrument beeps when storing an auto point.

Available for <Monitor CQ: Yes>. Instrument gives a

single alarm beep each time an auto point is not

recorded because the limit for the coordinate quality

is exceeded. For <Log By: Time> the beep is given

at the time when the point should have been

recorded. Unless <Log By: Time>, the beep is given

at 1 Hz once the auto logging has stopped due to the

exceeded coordinate quality.

Instrument never beeps.

Show Quick Links

Table of Contents