Leica GPS1200 Series Technical Reference Manual page 790

COGO
Access
COGO inverse calcula-
tion point - point step-
by-step
Refer to "37.2 Accessing COGO" to access COGO Inverse Input.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "37.2 Accessing COGO" to access COGO Inverse.
COGO Inverse Input, Inverse page
SHIFT CONF (F2) to configure the COGO application program.
2. COGO Inverse Input, Inverse page
<From:> The point ID of the first known point for the COGO calcula-
tion.
<To:> The point ID of the second known point for the COGO calcula-
tion.
Select the points to be used.
SURVY (F5) when <From:> or <To:> is highlighted. To manually
occupy a point for the COGO calculation.
For all point fields, the MapView interactive display on the Map page
can be used to select the desired point.
To type in coordinates for a known point open the choicelist when
<From:> or <To:> is highlighted. Press NEW (F2) to create a new
point.
3. COGO Inverse Input, Inverse page
The COGO calculation results are displayed on the same page.
GPS1200 790
Refer to
chapter
37.3
44.3
32.5
9.3.2
37.4.1