Leica GPS1200 Series Technical Reference Manual page 1127

STAKEOUT
Orthogonal Stakeout,
Stake page
Stakeout
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
OCUPY (F1)
To start measuring the point being staked. The
position mode icon changes to the static icon.
(F1) changes to STOP. The difference
between the current position and the point
being staked is still displayed.
STOP (F1)
To end measuring the point being staked.
When <Auto STOP: Yes> in CONFIGURE
Point Occupation Settings, recording of posi-
tions ends automatically as defined by the stop
criteria. The position mode icon changes to the
moving icon. (F1) changes to STORE. After
ending the measurements, the differences
between the measured point and the point to
be staked are displayed.
STORE (F1)
To store the measured point. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
GPS1200 1127