47.4
Description
Access step-by-step
X-SECTION
Survey: Job Name,
General page
Survey Cross Section
Surveying Cross Sections
The fields on this screen indicate which cross section element is to be surveyed next.
Step
Description
1.
Refer to "47.2 Accessing Survey Cross Section" to access X-SECTION Begin.
2.
In X-SECTION Begin select a job.
3.
Select a configuration set with <R-Time Mode: None> or <R-Time Mode:
Rover>.
4.
Select an antenna.
5.
CONT (F1) to access X-SECTION Survey: Job Name, General page.
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
OCUPY (F1)
To start measuring the next point of the cross
section. The position mode icon changes to the
static icon. (F1) changes to STOP.
Available if a template has been opened with
START (F4).
GPS1200
1269