Leica GPS1200 Series Technical Reference Manual page 578

Configuration of Devices
Description of fields
Field Option
<Name:> User input
<Type:> Output
<GPRS/ Yes or No
Internet:>
<Baud Rate:> From 2400 to
115200
<Parity:> None, Even or
Odd
<Terminator:>
CR/LF
CR
<Data Bits:> 6, 7 or 8
<Stop Bits:> 1 or 2
GPS1200
Description
Name of new device.
Same device type as was highlighted when NEW (F2)
was used.
Available for digital cellular phones and modems.
Defines the device as an Internet capable device and
adds it to the list in CONFIGURE GPRS Internet
Devices.
Frequency of data transfer from receiver to device in
bits per second.
Error checksum at the end of a block of digital data.
Available if required by the interface.
The terminator is a carriage return followed by a line
feed.
Not available for RS232 device. The terminator is a
carriage return.
Number of bits in a block of digital data.
Number of bits at the end of a block of digital data.
578