Leica GPS1200 Series Technical Reference Manual page 1067

Reference Line
Description of fields
Field Option
First field on the Choicelist
screen
<hA:> User input
<CUT:> Output
<FILL:> Output
<Ht:> Output
Description
The point ID of the point to be staked.
The default antenna height as defined in the active
configuration set is suggested. Refer to "2.3 Deter-
mining Antenna Heights". Changing the antenna
height here does not update the default antenna
height as defined in the active configuration set. The
changed antenna height is used until the application
program is exited.
The negative height difference from the height of the
current position to the height of the point to be staked.
To move down.
The positive height difference from the height of the
current position to the height of the point to be staked.
To move up.
Available for <Edit Height: No> in REFLINE Config-
uration, Heights page.
The orthometric height of the current position is
displayed. If the orthometric height cannot be
displayed, the local ellipsoidal height is displayed. If it
is not possible to display the local ellipsoidal height,
the WGS 1984 height is displayed.
GPS1200 1067