Surveying Points; Post-Processed Kinematic And Static Operations - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - General

Requirements

Access step-by-step

Surveying Points

Refer to "44.2 GPS Surveying Techniques" for information on static and post-processed

kinematic surveying techniques.

A typical configuration set for a static or post-processed kinematic operation is used.

<R-Time Mode: None> in CONFIGURE Real-Time Mode.

The table describes the main access to SURVEY Survey: Job Name.

Access is possible from other screens where individual point measurements are needed, for

example from COGO Inverse with SURVY (F5).

Refer to "44.1 Accessing Survey" to access SURVEY Survey Begin.

In SURVEY Survey Begin select a job.

Select a typical configuration set with <R-Time Mode: None>.

Select an antenna.

CONT (F1) to access SURVEY Survey: Job Name.

The position mode icon is the moving icon. This indicates that the antenna can be

moved around and that no static observations are being recorded.

If configured for post-processed kinematic operations, the logging of moving

observations begins. This is also indicated in the position mode icon.

Show Quick Links

Table of Contents