Accessing Configure Server To Connect - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - Controlling Devices
24.11.2
Access step-by-step
CONFIGURE
Server to Connect

Accessing CONFIGURE Server to Connect

Step Description
1. Refer to "22.2 Accessing Configuration Interfaces" to access
CONFIGURE Interfaces.
2. In CONFIGURE Interfaces highlight an interface which has an
Internet/Ethernet interface attached.
3. CTRL (F4) to access CONFIGURE XX Connection.
4. Open the choicelist for <Server:> to access CONFIGURE Server to
Connect.
GPS1200
CONT (F1)
To select the highlighted server and to return
to the screen from where this screen was
accessed.
NEW (F2)
To create a new server. Refer to "24.11.3
Creating a New Server".
EDIT (F3)
To edit a server. Refer to "24.11.4 Editing a
Server to Connect".
616
Refer to
chapter
23