Determine Coordinate System - Normal
Description of columns
Column
Description
WGS84 Pts
The point ID of the points chosen from <WGS84 Pts Job:>.
East
The Easting residual. If positions were not used in the transformation
calculation then ----- will be displayed.
North
The Northing residual. If positions were not used in the transformation
calculation then ----- will be displayed.
Height
The Height residual. If heights were not used in the transformation calcu-
lation then ----- will be displayed.
Indicates residuals that exceed the residual limit defined in DET C SYS
Configuration, Residuals page.
Indicates the largest residual in East, North and Height.
Next step
IF the residuals are THEN
unacceptable
acceptable
ESC returns to DET C SYS Step 3: Match Points (n). Matched
points can be edited, deleted or temporarily removed from the list
and the transformation recalculated.
CONT (F1) continues to DET C SYS Step 5: Store Coord System.
GPS1200
955