Leica GPS1200 Series Technical Reference Manual page 1137

Stakeout
Description of fields
Field Option
First field on the Choicelist
screen
<hA:> User input
<DIRC:> Output
<DIST:> Output
<CUT:> Output
Description
The point ID of the point to be staked. Accesses
STAKEOUT Data: Job Name where points are
shown according to sort and filter settings and staked
points are indicated by the staked out symbol .
The default antenna height as defined in the active
configuration set is suggested. Refer to "2.3 Deter-
mining Antenna Heights". Changing the antenna
height here does not update the default antenna
height as defined in the active configuration set. The
changed antenna height is used until the application
program is exited.
The bearing from the direction of the orientation to the
point to be staked seen from the current position.
Horizontal distance from the current position to the
point to be staked.
The negative height difference from the height of the
current position to the height of the point to be staked.
The value for <Height Offset:> configured in
STAKEOUT Configuration, Heights page is taken
into account. To move down.
GPS1200 1137