Config...\Instrument Settings...
Description of fields
Field
Option
<Sat System:>
GPS Only
GPS & Glonass
<L2C
Automatic or
Tracking:>
Always Track
<Cut Off
User input
Angle:>
<Loss of
Beep & Message
Lock:>
or No
Beep/Message
<SV Health:>
GPS1200
Description
Available for GX1230 GG/ATX1230 GG.
Defines the satellite signals accepted by the receiver
when tracking satellites.
Only GPS satellites are tracked.
GPS and GLONASS satellites are tracked.
Available for GX1230 (serial numbe > 465000)/
ATX1230 (serial number > 160000)/
GX1230 GG/ATX1230 GG.
Defines if the L2C signal will be tracked. The recom-
mended setting is Automatic.
Sets the elevation in degrees below which satellite
signals are not recorded and are not shown to be
tracked. Recommended settings:
•
For real-time: 10°.
•
For purely post-processing applications: 15°.
Activates an acoustic warning signal and a message
given by the receiver when satellites are lost and
therefore no position can be computed.
Sets the satellite tracking behaviour.
This setting is remembered when the receiver
is turned off. It is stored as part of the configu-
ration set.
420