Leica GPS1200 Series Technical Reference Manual page 959

Determine Coordinate System - Normal
For <Transfrm Type: Classic 3D>
Description of fields
Field Option
<Residuals:> None,
1/Distance
Multiquadratic
<Transform:> Output
<Ellipsoid:> Output
<Projection:> Output
<Geoid Output
Model:>
<CSCS Output
Model:>
Next step
STORE (F1) stores the coordinate system to the DB-X and attaches it to the <WGS84 Pts
Job:> selected in DET C SYS Determine Coord System Begin, replacing any coordinate
system attached to this job. <WGS84 Pts Job:> becomes the active job.
Description
The method by which the residuals of the control
XX
or points will be distributed throughout the transforma-
tion area. Refer to "38.3.1 Configuring Determine
Coordinate System - Normal" paragraph "DET C SYS
Configuration, Residuals page".
Name of transformation used, as defined in DET C
SYS Step 1: Choose Transform Type.
Name of ellipsoid used, as defined in DET C SYS
Step 2: Choose Parameters.
Name of projection used, as defined in DET C SYS
Step 2: Choose Parameters.
Name of geoid model used, as defined in DET C SYS
Step 2: Choose Parameters.
Name of CSCS model used, as defined in DET C
SYS Step 2: Choose Parameters.
GPS1200 959