Leica GPS1200 Series Technical Reference Manual page 1021

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Configuration,

Heights page

Reference Line

Description of fields

Use Ref Line

Use Start Point

Use DTM Model

<Edit Height:> No

Available if this screen was accessed from REFLINE

Reference Line/Arc Begin. Depending on the task

chosen this parameter controls the following:

When measuring to a line/arc, it determines the

delta height value which is displayed when points

are being measured.

When staking to or gridstaking a line/arc, it deter-

mines the height value to be staked out.

Available unless <Orientate: To Line/Arc>. Heights

are computed along the reference line/arc.

Heights are computed relative to the height of the

starting point.

The stakeout heights is computed from the DTM

Available unless this screen was accessed from

REFLINE Reference Line/Arc Begin.

The field <Height:> for the height of the current posi-

tion is displayed in REFLINE Measure Points, Ref

XX page and REFLINE Enter Offset Values and as

<Ht:> in REFLINE XX Stakeout, Ref XX page and

REFLINE +yyy.yy +xxx.xx, Ref XX page. The

values for <Height:> and <Ht:> cannot be changed.

Show Quick Links

Table of Contents