Arc Calculation - Offset Point - Leica GPS1200 Series Technical Reference Manual

37.8.3
Description
COGO arc calculation
offset point step-by-
step
COGO

Arc Calculation - Offset Point

The COGO arc calculation offset point calculates the coordinates of a new point after input
of arc and offset values in relation to an arc.
Elements that must be known are
• coordinates of three points.
• offsets.
OR
• coordinates of two points.
• radius to the two points.
• offsets.
The coordinates of the known points
• may be taken from the active job.
• may be measured during the COGO calculation.
• may be entered.
Arc management is not available for COGO arc calculations.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "37.2 Accessing COGO" to access COGO Arc Calculations
Input.
GPS1200
Refer to
chapter
865