44.6.3
Initialise while moving
step-by-step
Survey - General
Initialise while Moving
Step
Description
1.
Refer to "44.6.2 Accessing Initialisation for Real-Time Rover Operations" to
access the initialisation.
2.
Does the receiver currently have a fixed solution?
•
If yes, continue with step 4.
•
If no, continue with the next row.
The initialisation starts automatically.
3.
Continue with the row after step 4.
4.
YES (F6) to start the initialisation. The current ambiguity solution is discarded.
SURVEY Survey: Job Name
The position status icon changes to the code solution icon.
OCUPY (F1) is available but must not be pressed until the ambiguity solution is
gained.
5.
The initialisation is gained when the ambiguities are solved. This is indicated by
the position status icon.
6.
Continue with the surveying operation.
GPS1200
1185