Timed Occupations For All Types Of Operations - Leica GPS1200 Series Technical Reference Manual

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - General

Requirements

Access step-by-step

Timed occupation step-

Timed Occupations for All Types of Operations

Surveying regulations in some countries require that several receivers in a session start the

point occupation simultaneously at a predefined time. A start time can be specified in

SURVEY Survey: Job Name, Survey page. Timed occupations are possible for all types of

GPS operations, except for real-time reference operations.

<Auto OCCUPY: Timed> is configured in CONFIGURE Point Occupation Settings.

Refer to "19.6 Point Occupation Settings".

Time at Point is configured for one of the lines in one of the display masks. Refer to "19.2

Display Settings".

The functionality for timed occupations is integrated in SURVEY Survey: Job Name.

The table describes the main access to SURVEY Survey: Job Name.

Access is possible from other screens where individual point measurements are needed, for

example from COGO Inverse with SURVY (F5).

Refer to "44.1 Accessing Survey" to access SURVEY Survey Begin.

In SURVEY Survey Begin select a job.

Select a configuration set.

Select an antenna.

CONT (F1) to access SURVEY Survey: Job Name.

The table describes one special part of the GPS operation for individual GPS surveying tech-

niques. Refer to "44.3 Surveying Points" for information on performing the individual opera-

Show Quick Links

Table of Contents