46.3
46.3.1
Description
Diagram
Measure a hidden point
with Bearing & Distance
step-by-step
Survey - Hidden Points
Measuring Hidden Points
Bearing & Distance
One point must be known. It
•
may already exist in the job.
•
may be manually occupied during the hidden point measurements.
•
may be manually typed in.
The distance and the bearing from the known point to the hidden point are to be determined.
An auxiliary point helps compute the bearing which might not be known. The auxiliary point
may be measured in the direction from the known point to the hidden point.
P1
P0
GPS12_40
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
d
Known
P0 Known point, <Point:>
To be measured
d
α
P1 Auxiliary point, optional
Unknown
P2 Hidden point
GPS1200
Distance from P0 to P2
Bearing from P0 to P2
1223