Intersection With Tps Observation - Tps Observation - Leica GPS1200 Series Technical Reference Manual

37.6.5
Description
COGO

Intersection with TPS Observation - TPS Observation

The COGO intersection calculation TPS observation - TPS observation calculates the inter-
section point of two lines. A line is defined by a TPS station and a TPS measurement from
this station.
Elements that must be known are
• the coordinates of two points.
• azimuths of the lines.
The coordinates of the known points
• must be taken from the active job.
• must be TPS station points.
The azimuths of the lines
• must be TPS measurements from the known points.
Points with full coordinate triplets and position only points can be used.
GPS1200 839