Leica GPS1200 Series Technical Reference Manual page 898

COGO
Description of fields
Field Option
<Point ID:> User input
GPS1200
SHIFT INIT (F2)
To select an initialisation method and to force a
new initialisation. Available for configuration
sets allowing phase fixed solutions. Refer to
"44.6 Initialisation for Real-Time Rover Opera-
tions".
SHIFT INDIV (F5) and SHIFT RUN (F5)
To change between entering an individual
point ID different to the defined ID template and
the running point ID according to the ID
template. Refer to "19.1 ID Templates".
Description
The identifier for manually occupied points. The
configured point ID template is used. The ID can be
changed in the following ways:
• To start a new sequence of point ID's type over the
point ID.
• For an individual point ID independent of the ID
template SHIFT INDIV (F5). SHIFT RUN (F5)
changes back to the next ID from the configured
ID template. Refer to "19.1 ID Templates".
898