Leica GPS1200 Series Technical Reference Manual page 1079

REFLINE
Stake +yyy.yy +xxx.xx,
Ref XX page
Reference Line
Field Option
Start at Begin
Current Grid Pt
<Point ID:>
Grid ID
Pt ID Template
Next step
CONT (F1) to accept changes and continue to REFLINE Stake +yyy.yy +xxx.xx, Ref XX
page.
The title of this screen indicates the position of the grid being staked where +yyy.yy is the
station position along the grid line and +xxx.xx is the grid line offset.
The functionality of this screen is very similar to REFLINE XX Stakeout, Ref XX page. Differ-
ences between the two screens are outlined below. Refer to paragraph "REFLINE XX
Stakeout, Ref XX page" for all other key and field explanations.
Description
Each new grid line is started at the same end as
where the previous grid line started.
Each new grid line is started at the same end as
where the previous grid line finished.
Determines the format of the point ID for grid points.
Point ID is shown as the position of the grid being
staked where +yyy.yy is the station position along the
grid line and +xxx.xx is the grid line offset.
The point ID template as defined in the active config-
uration set is used. The point ID template can be
defined for <Survey Pts:> in CONFIGURE ID
Templates. Refer to "19.1 ID Templates".
GPS1200 1079