Configuration Without Real-Time Interface - Leica GPS1200 Series Technical Reference Manual

Config...\Interfaces... - General
22.3.2
Access
CONFIGURE
Real-Time Mode

Configuration without Real-Time Interface

Refer to "22.3.1 Overview" to access CONFIGURE Real-Time Mode.
<R-Time Mode: None> means the receiver is not to be used as a real-time reference or as
a real-time rover.
Next step
IF a Space-Based Augmentation System THEN
needs to be configured
does not need to be configured
GPS1200
SHIFT SBAS (F5) to access CONFIGURE
SBAS Tracking Mode.
CONT (F1) returns to the screen from where
CONFIGURE Real-Time Mode was
accessed.
466