Reference Line
Description of fields
Field
Option
<Task:>
Measure to Line or
Measure to Arc
GPS1200
CONT (F1)
To accept changes and continue with the
subsequent screen.
SLOPE (F3)
To set a slope from a defined reference
line/arc. Cut/Fill values can then be displayed
to the slope when measurements are taken
along the reference line/arc. Refer to "41.4.5
Defining Reference Line/Arc Slopes".
OFSET (F4)
To define reference line/arc offsets, shifts,
rotations, height offsets and DTM offsets.
Refer to "41.4.4 Defining Reference Line/Arc
Offsets".
SURVY (F5)
To manually occupy a point. Available when a
point field is highlighted.
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure the reference line/arc. Refer to
"41.3 Configuring Reference Line".
Description
Defines the task to be performed.
Calculates the coordinates of a point from it's position
relative to the reference line/arc.
1026