Plot Mode - Mapview Screen Area - Leica GPS1200 Series Technical Reference Manual

MapView Interactive Display Feature
32.6
Description
Access
COGO
XX Results,
Plot page

Plot Mode - MapView Screen Area

The plot mode of MapView is available as the Plot page in an application program and can
be used to view the results of the application program. Results are shown in black, all other
information, that is displayable, is shown in grey.
Refer to "32.2 Accessing MapView" paragraph "Example access for plot mode:".
OR
As a part of an application program, for example, COGO.
The COGO XX Results, Plot page is used as the example below. The functions described
are the same for all Plot pages.
The softkeys described below are specific to MapView in plot mode. Refer to "32.4.1
Softkeys" for descriptions of the standard softkeys.
GPS1200
SHIFT FACE (F1) and SHIFT PLAN (F1)
Available in REFPLANE XX Reference
Plane, Plot page. To change between the face
and the plane view of the plane.
SHIFT FIT R (F4)
To fit the results in the screen area.
SHIFT RFRSH (F5)
To refresh the screen.
730