Leica GPS1200 Series Technical Reference Manual page 1115

Stakeout
Field Option
<DTM Job:> Choicelist
<Config Set:> Choicelist
<Antenna:> Choicelist
Next step
IF the Stakeout
application program
is to be accessed
is to be configured
Description
Available for <Use DTM: DTM only> and <Use DTM:
DTM & Stake Job> in STAKEOUT Configuration,
Heights page. To select a DTM to be staked and to
select the active DTM layer to be used. Heights are
then staked out relative to the selected DTM. Refer to
"43.4.4 Staking Out a DTM".
The active configuration set. All configuration sets
from Main Menu: Manage...\Configuration Sets
can be selected. Configuration sets with <R-Time
Mode: Reference> cannot be used in the Stakeout
application program.
The antenna currently defined to be used in the
selected configuration set. All antennas from Main
Menu: Manage...\Antennas can be selected.
THEN
CONT (F1) accepts the changes and accesses Stakeout application
program. Refer to "43.4 Staking Out".
CONF (F2). Refer to "43.3 Configuring Stakeout".
GPS1200 1115