Reference Line
REFLINE
Measure Points,
Ref XX page
The pages shown are those from a typical configuration set. An additional page is available
when a user defined display mask is used.
GPS1200
OCUPY (F1)
To start measuring the point. The position
mode icon changes to the static icon. (F1)
changes to STOP. The difference between the
current position and the point being staked is
still displayed.
STOP (F1)
To end measuring the point. When <Auto
STOP: Yes> in CONFIGURE Point Occupa-
tion Settings, recording of positions ends
automatically as defined by the stop criteria.
The position mode icon changes to the moving
icon. (F1) changes to STORE.
STORE (F1)
To store the measured point. When <Auto
STORE: Yes> in CONFIGURE Point Occu-
pation Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
LINE (F4)
To define/select a reference line/arc.
Accesses REFLINE Choose Task & Refer-
ence Line, Reference page.
STAKE (F5)
To define reference line offsets to be staked
out in relation to the reference line. Accesses
REFLINE Enter Offset Values. Refer to "41.6
Staking to a Reference Line/Arc".
1048