Set Net Parameters - Leica GPS1200 Series Technical Reference Manual

Config...\Instrument Settings...
20.5
Description
Typical uses
Access

Set NET Parameters

The Set NET Parameters option is available on the GRX1200 Pro and GRX1200 GG Pro.
The settings on the screen allow the network parameters to be defined for the Ethernet
device.
The Ethernet connection can be used to remotely
• download data from a reference station.
• access, control and configure a reference station.
The use of the Ethernet connection could be of interest in the following examples:
Example 1: A receiver is set up on a glacier and is connected to the Internet via the
Ethernet connection. A computer in a remote location can be used to access
the receiver and download data about the position of the receiver as well as
perform any controlling or configuring functions that are required.
Example 2: A permanent reference station on a mountain used to measure movement is
connected to the Internet via the Ethernet connection and can be accessed,
controlled and configured using a computer in the office.
Example 3: A reference station on top of a survey company's building is used to broad-
cast real-time corrections and is connected to the company's intranet via the
Ethernet connection. The reference station can be accessed, controlled and
configured by the survey personnel within the company.
Select Main Menu: Config...\Instrument Settings...\Set NET Parameters.
OR
GPS1200 428