Creating A New Cross Section Template - Leica GPS1200 Series Technical Reference Manual

Survey Cross Section
47.5.2
Access
X-SECTION
New Template,
General page
X-SECTION
New Template,
Elements page

Creating a New Cross Section Template

Step Description
1. Open the choicelist for <Template:> in X-SECTION Survey: Job Name, General
page.
2. X-SECTION Templates
Is a cross section template to be created from scratch?
• If yes, NEW (F2) to access X-SECTION New Template.
• If no, COPY (F5) to access X-SECTION New Template.
Type in a name for the new cross section template.
Next step
PAGE (F6) changes to the Elements page. Refer to paragraph "X-SECTION New Template,
Elements page".
IF this screen was THEN
accessed with
NEW (F2) all columns are empty.
COPY (F5) the same elements are listed as were being used for the template
highlighted when COPY (F5) was pressed.
GPS1200 1278