Leica GPS1200 Series Technical Reference Manual page 1167

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Survey - General

The setting for <Thematc Codes:> in CONFIGURE Coding & Line-

work determines the availability of the subsequent fields and

For <Thematc Codes: With Codelist>:

The codes from the job codelist are used.

<Code:> Codes from the job codelist can be selected. The setting

for <Show Codes:> in CONFIGURE Coding & Linework deter-

mines if either all codes or only point codes are available. The

description of the code is shown as an output field. The attributes

are shown as output, input or choicelist fields depending on their

For <Thematc Codes: Without Codelist>:

Codes for points can be typed in but not selected from a codelist.

<Code:> The point code to be stored with the point. A check is

performed to see if a point code of this name already exists in the

job. If so, the according attributes are shown.

<Attribute n:> Up to eight attribute values are available.

Is <Thematc Codes: With Codelist>?

If yes, continue with the next row.

If no, continue with step 7.

NEW-A (F2) allows additional attributes to be created for this point

Show Quick Links

Table of Contents