Leica GPS1200 Series Technical Reference Manual page 1173

Survey - General
STORE (F1)
To store the point information. When <Auto
STORE: Yes> in CONFIGURE Point Occupa-
tion Settings, the measured point is stored
automatically. (F1) changes to OCUPY.
It may happen that a point with the same point
ID exists in the job. If the codes and/or attribute
values of the new and the existing point do not
match, a screen opens where they can be
corrected. Refer to "11.5 Code and Attribute
Mismatch".
H PNT(F5)
To measure a hidden point. Refer to "46
Survey - Hidden Points".
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure auto points and hidden point
measurements. Accesses SURVEY Configu-
ration. Refer to "45 Survey - Auto Points".
Refer to "46 Survey - Hidden Points" for infor-
mation on the fields and keys.
SHIFT AVGE (F2)
To check the residuals for the averaged posi-
tion. Available for <Averaging Mode:
Average> and for more than one measured
coordinate triplet recorded for the same point.
Refer to "9.3.4 Mean Page".
GPS1200 1173