Leica GPS1200 Series Technical Reference Manual page 863

Diagram
COGO arc calculation
base point step-by-step
COGO
P3
d2
P0
GPS12_121
Arc management is not available for COGO arc calculations.
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step Description
1. Refer to "37.2 Accessing COGO"to access COGO Arc Calculations
Input.
COGO Arc Calculations Input, Input page
SHIFT CONF (F2) to configure the COGO application program.
2. COGO Arc Calculations Input, Input page.
<Task: Calc Base Point>
P
d1
P2
P0 <Start Point:>
P1 <End Point:>
P2 <Offset Point:>
P3 Base point
d1
d2
GPS1200
<ΔOffset-XX:>
<ΔArcDist-XX:>
Refer to
chapter
37.3
37.8.1
863