Leica GPS1200 Series Technical Reference Manual page 340

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Convert...\Export Data from Job

<File Name:> The name of the file to which the data should be

exported. The name is automatically suggested based on the job

name to be exported and an extension. The default extension to be

used can be configured in the EXPORT Define ASCII Export panel

using CONF (F2).

Select the job to be exported and enter an individual file name or

accept the suggested name.

Highlight <Format File:> and ENTER.

EXPORT Format Files

All format files available in the System RAM are listed. Select the

format file to be used.

DEL (F4) deletes the highlighted format file from the System RAM.

CONT (F1) selects the highlighted format file and leads back to

EXPORT Export Data from Job.

FILT (F4) to set the sort and filter settings for export. Accesses

EXPORT Sorts & Filters.

EXPORT Sorts & Filters, Points page

<Sort:> The order in which points, lines and areas are exported.

<Filter:> Defines which points are exported.

PAGE (F6) changes to the Lines or Areas page. The setting for

<Filter:> on these pages defines which lines or areas are exported.

Show Quick Links

Table of Contents