Leica GPS1200 Series Technical Reference Manual page 954

Hide thumbs Also See for GPS1200 Series:

Table of Contents

Determine Coordinate System - Normal

Step 4: Check Resid-

CALC (F1) computes the transformation and continues to DET C SYS Step 4: Check Resid-

uals. Refer to paragraph "DET C SYS Step 4: Check Residuals".

If a coordinate system to be updated contains a point that was deleted from the active job

and a new point was created in that job with the same point ID but different coordinates, the

coordinates of the old point will still be used for the calculation. Pressing EDIT (F3) to edit a

highlighted pair of matched points containing the deleted point, will overwrite the coordinates

of the old point and the coordinates of the new point will be used in the calculation.

Displays a list of the matched points used in the transformation calculation and their associ-

ated residuals.

To accept the residuals and to continue with

the subsequent screen.

To view results of the transformation.

Accesses DET C SYS Transformation

Results. Refer to "39.5 Transformation

To display information about height residuals.

Show Quick Links

Table of Contents