Leica GPS1200 Series Technical Reference Manual page 379

Config...\Survey Settings...
Description of fields
Field Option
<Quick Code:> Never
On
Off
<Digits:> 1, 2 or 3
<Rec Free After Point or
Code:>
Before Point
<Attributes:>
Default Values
Last Used
Description
Prevents the use of quick coding completely.
Allows the use of quick coding and activates it.
Allows the use of quick coding, but keeps it deacti-
vated.
Available unless <Quick Code: Never>.
Sets the mostly used number of digits for the quick
code. Quick codes with less digits can still be used.
While typing a quick code during a survey, using
ENTER after typing one or two digits of the quick
code indicates the end of the input.
Available unless <Quick Code: Never>.
Determines if a free code measured with a quick code
is stored before or after the point.
Determines the attribute values displayed under
certain circumstances. This is applicable to both the
storing and displaying of attribute values.
When available, the default attribute values, as
stored in the job, are displayed and stored.
When available, the last used attribute values as
stored in the job are displayed and stored.
GPS1200 379