Traverse With Angle Right - Leica GPS1200 Series Technical Reference Manual

COGO
37.5.3
Access
COGO
Traverse Input,
Input page

Traverse with Angle Right

Refer to "37.2 Accessing COGO" to access COGO Traverse Input.
GPS1200
CALC (F1)
To calculate the COGO point.
INV (F2)
To calculate the values for the distance and the
offset from two existing points. Available if
<HDist-XX:> or <Offset:> is highlighted.
SSHOT (F3).
To calculate the point as a sideshot.
LAST (F4)
To select the values for the distance and the
offset from previous COGO inverse calcula-
tions. Available if <HDist-XX:> or <Offset:> is
highlighted.
SURVY (F5)
To manually occupy a point for the COGO
calculation. Available if <From:> or <Back-
sight:> is highlighted.
SHIFT CONF (F2)
To configure the COGO application program.
SHIFT MODIF (F4)
To mathematically modify the values for the
angle right, the distance and the offset. Avail-
able if <Angle Right:>, <HDist-XX:> or
<Offset:> is highlighted.
818