Survey - Auto Points
45.2
Access
SURVEY
Configuration,
Auto Points page
Configuring Auto Points
Select Main Menu: Survey. In SURVEY Survey Begin press CONF (F2) to access
SURVEY Configuration.
OR
In SURVEY Survey: Job Name press SHIFT CONF (F2) to access SURVEY Configu-
ration.
The settings on this page activate the logging of auto points and define the method of
logging.
GPS1200
CONT (F1)
To accept changes and return to the screen
from where this screen was accessed.
DMASK (F3)
To configure what is viewed in the Auto page
in the Survey application program. Available
for <Log Auto Pts: Yes>. Refer to paragraph
"SURVEY Configure Auto Pts Display Mask"
below.
PAGE (F6)
To change to another page on this screen.
1192