Creating A New Device - Leica GPS1200 Series Technical Reference Manual

23.3
Description
Access step-by-step
CONFIGURE
New Device
Configuration of Devices

Creating a New Device

Allows a new device to be configured.
Step Description
1. Refer to "23.2 Accessing CONFIGURE Devices / CONFIGURE GPRS Internet
Devices" to access CONFIGURE Devices / CONFIGURE GPRS Internet
Devices.
2. Highlight a device of the same type as the device to be created, from the list.
3. NEW (F2) to access CONFIGURE New Device.
STORE (F1)
To store the new device and to return to the
screen from where this screen was accessed.
ATCMD (F4)
Available for digital cellular phones and
modems. To configure communication
commands. Refer to paragraph "CONFIGURE
GSM/Modem AT Command Lines".
GPS1200 577