Leica GPS1200 Series Technical Reference Manual page 1074

Reference Line
Step Description
It may happen that a point with the same point ID exists in the job. If
the codes and/or attribute values of the new and the existing point do
not match, a screen opens where they can be corrected.
Do not turn off the receiver.
17. PAGE (F6) to access the Map page which provides an interactive
display of the defined reference arc and the points staked relative to
it. Displayed is also
• the horizontal distance from the current position to the point to be
staked.
• the height difference from the height of the current position to the
height of the point to be staked.
18. Are more points to be staked?
• If yes, continue with step 19.
• If no, continue with step 21.
19. REFLINE Enter Offset Values
Enter the parameters of the next point to be staked.
20. Repeat steps 11. to 18.
21. SHIFT QUIT (F6) returns to GPS1200 Main Menu.
22. The results are written to the logfile.
GPS1200 1074
Refer to
chapter
32
41.6