Leica GPS1200 Series Technical Reference Manual page 875

COGO
Shift, Rotate & Scale,
Shift page
COGO
CALC (F1)
To perform the shift, rotation and scale calcula-
tion and to continue with the subsequent
screen. Calculated COGO points are not yet
stored.
INV (F2)
To calculate the amount of shift in Easting,
Northing and height from two existing points.
Available if <Δ Easting:>, <Δ Northing:> or
<Δ Height:> is highlighted.
LAST (F4)
To select the value for the shift from previous
COGO inverse calculations. Available if
<Δ Easting:>, <Δ Northing:> or <Δ Height:>
is highlighted.
SURVY (F5)
To manually occupy a point for the COGO
calculation. Available for <Method: Use 2
Points> if <From:> or <To:> is highlighted.
PAGE (F6)
To change to another page on this screen.
SHIFT CONF (F2)
To configure the COGO application program.
Accesses COGO Configuration. Refer to
"37.3 Configuring COGO".
GPS1200 875